 |
 |
|
 |
 |
0.5 Class Energy Meter
RM 705 L4 is an Integrated Modular Electronic Power and Energy Meter with Time Stamped Data Storage.
The RM Series provide Bi-Directional revenue accurate energy metering. RM 705 L4 measure the demand on sliding and fixed window method (factory settable) as per the user requirement. RM 705 L4 offeres most comprehensive Instantaneous measurement of true RMS per Phase and total for :
- Voltage & Current
- KW, kVA & kVAr
- Power Factor
- Frequency
- Demand
Measurement Parameter
- True RMS measurement
- Voltage & Current (Acc: 0.25 %)
- KW, kVA & kVAr (Acc: 0.50 %)
- Power Factor (0.5 Lag to 0.5 Lead)
- Frequency (Acc: ± 0.1 Hz)
- Energy: Import & Export
- Maximum Demand kW, kVA
- Voltage & Current unbalance %
- Display current Date & Time
- LED Pulse output for Calibration
Accuracy Standards
- IEC – 62053 – 22
- IS – 14697 : 1999 tested as Per CBIP TR 88
Voltage Inputs
- 50 to 300 VAC
- Accuracy V L-N: 0.25 % reading
- Accuracy Hz: ± 0.1 Hz
- Supports 3 Phase 3 wire, 3 Phase 4 wire Connection
- Standard screw-in terminals
Power Supply
- 110 V to 300 VAC & VDC
Current Inputs
- 5 Amp nominal
- Accuracy Current: 0.25 % Reading
- Worst Case Burden (@ 5 A < 0.05 VA) 20 % Over range full accuracy
Data Loging
The RM Series provides data storage in non volatile memory of capacity 200 KB. The logs can be retrived via RS 485 port. As default all the basic parameter are stored at 15 min Interval.
Software Integration
The meters can be integrated with an Energy Mangement or SCADA system to provide remote display of all measured parameters and meters configurations. The meter communicates on MODBUS RTU protocol via RS 485 port.
Applications:
Panel Metering, AMR, APC, Substation Automation, Industrial metering etc.
